What you need for assembly
To mount your RockDock®, you will need the following tools:
- Torx T20
- Pencil
- Tape measure
- 8 mm masonry drill bit
- 4 mm metal drill bit
- Spirit level
- Drill
The RockDock® can be mounted on a wall or on a 70x70 mm post (not included). The wall plate provides for both mounting options, see marked points A and B.
Assembly overview
The RockDock® offers two mounting options:
- Wall mounting (marked points A)
- Post mounting (marked points B)
The shipping box contains a marking aid that allows you to easily transfer the drill points.
Wall Mounting – Step-by-step guide
1. Tear off the lid of the shipping box and place it level at the desired height.
2. Drill through the four fixing points A with a 4 mm drill bit.
3. For mounting on masonry:
- Drill the holes with an 8 mm masonry drill bit
- Insert the supplied plugs
- Screw the RockDock® tight with the Torx screws
4. For mounting on wood:
- Predrill the holes with a 4 mm wood drill bit
- Screw the RockDock® directly into place
Please note: once one of the fixing points has been drilled through, the product can no longer be returned.
Post Mounting – Step-by-step guide
1. Drill through the four fixing points B with a 4 mm drill bit.
2. Place a 70x70 mm post at least 40 cm into the ground, ensuring it protrudes 50 cm above ground.
3. Hold the RockDock® against the post and pre-drill the holes.
4. Screw the RockDock® tight with the supplied Torx screws.
Safety Information
For safe use of the RockDock®, it is important to consult the Safety Data Sheet and the Legal Declaration of Product Safety. These documents are part of the general terms and conditions and are available on our website.
Safety and warranty are only guaranteed if assembly and use are carried out according to these guidelines.
Frequently Asked Assembly Questions
Can I use the RockDock® outdoors?
Yes, the recycled HDPE is completely weather-resistant.
Is the RockDock® suitable for e-MTBs?
Yes, the stand is designed for heavy e-MTBs.
Does the stand touch my frame?
No, the RockDock® is completely frame-free.
Can I move the mounting later?
Yes, you can move the RockDock.
Download the manual (multilingual) below